Training and Consulting Seminars
Hazardous Waste Management-RCRA Compliance for Generators
This course provides the regulatory compliance requirements for generators of RCRA hazardous waste, and s intended for managers, supervisors, and employees who are responsible for hazardous waste management. The duration for this seminar is eight (8) hours. RCRA (as administered by the EPA and state regulatory agencies) requires that recurrent training must be completed annually. Includes: Continental Breakfast, Lunch, Training and Reference Manual, Handouts, and a Certificate of Attendance. | | Dates & Locations | | Cincinnati, OH
Holiday Inn Cincinnati Eastgate
4501 Eastgate Boulevard
Cincinnati, OH 45245
Phone: (513) 752-4400 - April 15, 2008
- August 19, 2008
- December 2, 2008
| | Buffalo, NY
Hilton Garden Inn
4201 Genessee St.
Buffalo, NY 14225
- February 13, 2008
- May 7, 2008
- July 16, 2008
- October 8, 2008
- December 10, 2008
|
All classes run from 8:00am until 4:30pm
Includes: PowerPoint Presentation, Hazmat original RCRA Compliance for Generators manual, Handouts, Certificate of Attendance, Continental Breakfast and Lunch. Price: $330.00 Per Attendee
USDOT Hazardous Materials Transportation -Shipper Requirements
This course is designed to meet the general awareness, familiarization, safety, security awareness and applicable function-specific training requirements of the USDOT Hazardous Materials Regulations, 49 CFR Part 172, Subpart H for shippers (offers). The course is intended for mangers, supervisors, and other “hazmat employees” who are responsible for functions that have a direct impact on the safe transportation of hazardous materials by highway and rail, to include hazardous material identification, recognition/selection of proper shipping descriptions, selection of authorized non-bulk and bulk packaging, marking, labeling/placarding of containers, completion of shipping documents and emergency response information, loading/unloading, vehicle placarding; hazardous materials incident response and reporting, and record keeping. The duration of this seminar is eight (8) hours. Per the USDOT, recurrent training for “hazmat employees” must be completed at least every three (3) years. Compliance requirements for Explosives (Class 1) and Radioactive Materials (Class 7) are not included in this training program.
| | Dates & Locations | | Cincinnati, OH - April 16, 2008
- August 20, 2008
- December 3, 2008
| | Buffalo, NY
- April 2, 2008
- August 12, 2008
- October 9, 2008
- December 11, 2008
|
All classes run from 8:00am until 4:30pm
Includes: PowerPoint Presentation, Hazmat original DOT HM-126F manual, current 49 CFR Parts 100-185, Emergency Response guide books, Handouts, Certificate of Attendance, Continental Breakfast and Lunch. Price: $385.00 Per Attendee
IATA Dangerous Goods Training
This course is designed to meet the function-specific training requirements of the USDOT Hazardous Materials Regulations (49 CFR Part 172 Subpart H) for shippers who offer “dangerous goods” for air transport using air carriers who subscribe to the IATA Dangerous Goods Regulations, such as Federal Express and DHL. The course is intended for mangers, supervisors, and other “hazmat employees” who are responsible for functions that have a direct impact on the safe transportation of “dangerous goods” by air transport, to include classification, identification, understanding of variations and limitations packing, marking and labeling, and documentation. The course also offers a discussion of security awareness. The duration of this seminar is eight (8) hours. Compliance requirements for air shipment of Radioactive Materials (Class 7) are not included in this training program.
Topics Include: - IATA Dangerous Goods Regulations
- Applicability
- Limitations
- Identification/Classification
- Package Selections
- Markings and Labeling
- Shipping Papers
- DOT Security Requirements
| | Dates & Locations | | Cincinnati, OH - April 17, 2008
- August 21, 2008
- December 4, 2008
| | Buffalo, NY
- April 3, 2008
- August 13, 2008
- November 19, 2008
|
All classes run from 8:00am until 4:30pm
Includes: IATA Dangerous Goods manual, Handouts, Certificate of Attendance, Continental Breakfast and Lunch. Price: $435.00 Per Attendee
OSHA 10-Hour Construction Outreach (2 Day Course)
This 10-hour Construction Outreach Training course (presented over 2 consecutive days) is designed for construction workers, foremen, job supervisors and anyone involved in the construction industry. OSHA recommends the 10 hour construction outreach training program as an orientation to occupational safety and health for workers covered by OSHA 29 CFR Part 1926. Workers must receive additional training, when required by OSHA standards, on the specific hazards of the job. Dates & Locations: February 13 & 14 Buffalo, NY Hilton Garden Inn 4201 Genessee St. Buffalo, NY 14225 (Dates) The seminar starts promptly each day at 9:00am and concludes at 3:30pm Includes: Continental Breakfast and Lunch each day, Handouts, and an OSHA 10 Hour Construction Outreach Training Program Card/Certificate Price: $400 Per Attendee
OSHA 30-Hour Construction Outreach (4 Day Course)
This 30 hour Construction Outreach Training course (presented over 4 consecutive days) is a comprehensive safety program designed for safety directors, foremen, and field supervisors or anyone involved in the construction industry. OSHA recommends the 30 hour outreach training course as an orientation to occupational safety and health for workers covered by OSHA 29 CFR Part 1926. Construction workers must receive additional training, when required by OSHA standards, on specific hazards of the job. Dates & Locations: February 18-21 Buffalo, NY Hilton Garden Inn 4201 Genessee St. Buffalo, NY 14225 The seminar starts promptly each day at 8:00am and concludes at 5:00pm on Days 1, 2, and 3; and will concludes at 3:00 PM on Day #4. Includes: Continental Breakfast and Lunch each day, 29 CFR Part 1926 Construction Series Regulations, Handouts, and an OSHA 30 Hour Construction Outreach Training Program Card/Certificate Price: $800 Per Attendee
Advanced RCRA Workshop for Generators - 2 Day
This advanced workshop is presented over 2 consecutive days, and provides attendees such as managers and supervisors with more detail into the regulatory compliance requirements for generators of RCRA hazardous waste, including but not limited to solid waste identification, hazardous waste characterization, solid waste/hazardous waste exceptions and exclusions, used oil and universal waste management, management standards for accumulation and storage of hazardous waste in containers and tanks, control of air emissions (Subparts AA, BB, CC), land disposal restrictions (LDR), and the Uniform Hazardous Waste Manifest. The total duration of this workshop is 16 hours. Dates & Locations: March 12 & 13 Buffalo, NY Hilton Garden Inn 4201 Genessee St. Buffalo, NY 14225
Dates & Locations: September 24 & 25 The Poughkeepsie Grand Hotel 40 Civic Center Plaza Poughkeepsie, NY 12601 Workshops start promptly each day at 8:00am and conclude at 4:30pm Includes: Continental Breakfast and Lunch each day, Training and Reference Manual, Handouts, and a Certificate of Attendance.
Price: $395.00 Per Attendee
Register Now
Advanced USDOT Workshop
This advanced workshop is provided over 2 consecutive days, and provides attendees such as managers and supervisors with more regulatory compliance detail with regard to the USDOT Hazardous Materials Regulations requirements for shippers (offerors) by highway and rail. Topics that will be discussed in more detail include, but a re not limited to, hazard class/division definitions, use of the Hazardous Materials Table, selection of proper shipping descriptions, shipping description modifications, regulation of hazardous substances, selection of authorized non-bulk and bulk packaging, marking, labeling/placarding of containers, completion of shipping documents and emergency response information, vehicle placarding; and hazardous materials incident response and reporting, and record keeping. The total duration of this workshop is 16 hours. Compliance requirements for Explosives (Class 1) and Radioactive Materials (Class 7) are not included in this training program. Dates & Locations: June 18 & 19Buffalo, NY Hilton Garden Inn 4201 Genessee St. Buffalo, NY 14225 The workshop starts promptly each day at 8:00am and concludes at 4:30pm Includes: Continental Breakfast, Lunch, Training and Reference Manual, a Current Copy of 49 CFR Parts 100-185, Current Emergency Response Guidebook, Other Handouts, and a Certificate of Attendance.
Price: $450.00 Per Attendee
|
